The Pilot Plant at TUHH – European solution for aerogel tech. translation – Fact Sheet

About the TUHH pilot plant

The TUHH pilot plant for aerogel production comprises of two high-pressure units (64 L & 25 L capacity) to perform the supercritical carbon dioxide drying needed for aerogel production.
The unit is enclosed in a ventilated cabin satisfying the ATEX norms. Each unit is operated independently in closed loop setting with carbon dioxide recycling. Aerogel particles, beads and monoliths can be processed (100‘s of liters) for product prototyping.
Customized aerogel processing and parameter settings investigations can also be carried out upon request.

Supercritical carbon dioxide drying

Supercritical carbon dioxide drying is a methodology that allows to remove the solvent inside the gel without collapsing the intrinsic pore structure of the gel network. Several industrially available solvents such as ethanol, propanol, methanol, acetone, ethyl-acetate, DMSO and others can be extracted with this technique. The modern version of supercritical carbon dioxide drying is carried out between 40-65 °C and 90-120 bar pressure. The drying time mainly depends on the gel dimensions, gel chemistry and the solvent choice. Initial supercriticalcarbon dioxide drying feasibility tests with proprietary formulations can be checked upon request.

Aerogel processing

Aerogel production is a three step process involving
1. Gel production
2. Solvent exchange (for water based gels)
3. Supercritical carbon dioxide drying
Gels can be processed as particles (<100 μm), beads (0.1-3.0 mm) or in monolithic form.

If gels are processed in solvents incompatible with supercritical carbon dioxide (example: water); solvent exchange to a compatible solvent (example: ethanol) is necessary. Solvent recycling (>95 %) feasibility can also be demonstrated with ethanol-water systems.

Download the fact sheet here
NANOHYBRIDS-Pilot Plant at TUHH_Fact Sheet

Comments are closed.